Specialist Technical Products Ltd
Experts in Butyl Tape
Tel:   01606 590909
 

STP Tape Products


HQB1 HIGH QUALITY BUTYL TAPE

(DOWNLOAD HQB1 DATA SHEET) (DOWNLOAD HQB1 MSDS SHEET)

GENERAL DESCRIPTION:

HQB2 Butyl Tape

HQB1 is a preformed high performance polyisobutylene (PIB) based sealing tape available in single strand or multi-lane rolls. This product has a multitude of applications where joints need to be formed to seal against air and water ingress. The product is cost effective, non toxic, forms an instant seal and requires no tools to apply and has a life expectancy in excess of 25 years when correctly used and applied.

For the roofing and cladding industry HQB1 has been independently tested to the requirements of the NFRC (The National Federaton of Roofing Contractors) Technical Bulletin 36 and acheived class “A” rating. A copy of the independent results can be downloaded HERE

HQB2 HIGH QUALITY BUTYL TAPE

(DOWNLOAD HQB2 DATA SHEET) (DOWNLOAD HQB2 MSDS SHEET)

GENERAL DESCRIPTION :

HQB2 is a similar product to HQB1 but with enhanced adhesive characteristics for more demanding applications where there are requirements for a degree of bonding particularly difficult materials such as polyethylene in the damp proof/jointing market.For this sector, HQB2 has a lower water vapour permeability than HQB1. A copy of results carried out on  HQB1, HQB1T and HQB2 by an independent body,(VERSAPERM LIMITED), with regards to water permeability can be found (HERE).

HQB1T HIGH QUALITY BUTYL TAPE

(DOWNLOAD HQB1T DATA SHEET) (DOWNLOAD HQB1T MSDS SHEET)

GENERAL DESCRIPTION :

HQB1T is a preformed high performance butyl rubber based sealing tape available in single strand or multi-lane rolls. This product has been developed primarily for the tunnelling industry where a firmer sealant is required to seal against air and water ingress. This product is often required in much larger profiles and can be manufactured in sizes up to 45mm in thickness. The product is cost effective, non toxic and requires no tools to apply.

 

HQB1P STRIP SEAL HIGH QUALITY BUTYL TAPE

(DOWNLOAD HQB1P DATA SHEET)

GENERAL DESCRIPTION :

HQB1P is a preformed high performance polyisobutylene (PIB) based high tack self wound sealing tape extruded onto a permanently fixed clear polyester backing film available in single strand rolls. This product is primarily used as an overlap tape where joints need to be formed to seal against air, moisture and water ingress. The product is cost effective & non toxic.

 

MOST COMMON APPLICATIONS FOR OUR PRODUCTS :

ROOFING & CLADDING industry where it creates an excellent seal in situations such as side and end lap joints and the bead section is particularly recommended for large corrugated end lap sheet profiles.

HEATING & VENTILATION market has found this product to be preferable to other methods of sealing flanges on ducting due to its ease of use and solvent free formulation.

AEROSPACE vacuum forming processes as a disposable sealant & adhesive where it can be subjected to temperatures up to 150 deg.C.

AUTOMOTIVE uses include sealing around the frames of sun roofs.

GREENHOUSE manufacturers include this product to seal between the glazing and framework

CARAVAN manufacturers have many applications such as sealing between mouldings and the outer skin, lap joints on the body work and other areas where fittings are attached piercing the outer skin.

FIRE PROTECTION is enhanced by use of an intumescent version HQB1FR.

DAMP PROOFING where the higher adhesion product HQB2 is used forbonding & sealing applications such as cavity trays & polythene membranes.

FEATURES & BENEFITS :

* SELF WOUND ROLL PRESENTATION *

* SOLVENTLESS FORMULATION *

* INSTANT SEAL *

* DIRECT CONTROL OVER QUANTITY OF SEALANT USED IN THE JOINT *

* ENVIRONMENTALLY FRIENDLY *

* EASE OF USE *

* GOOD ADHESION ON BOTH FACES TO MOST BUILDING MATERIALS *

*HIGH PUMPING RESISTANCE *

HQB1T Butyl Tape

All our tapes should be applied to surfaces at a temperature range of between +4 and +30 deg.C. For best performance the surfaces should be clean, dry, and grease free. The product should be unwound and lightly pressed into position leaving the release paper in place. On forming the joint the release paper is removed and the closing surface pushed firmly in place, pressure applied along the length of the joint and mechanically fixed if necessary.

TAYFIRE UNIVERSAL FIRE (TUF) SEAL – 4 ½ HR SEISMIC SEAL

(DOWNLOAD STP TUF PRODUCT DATA SHEET)

General Information:
The Tayfire Universal Fire (TUF) Seal is a passive linear gap seal which has been independently tested by Warrington Fire Research Centre to BS 476: Part 20: 1987 including joints, achieving over 4 hours integrity.

It is intended for use as a fire and smoke sealing system for all kinds of gaps and joints including larger than normal movement, expansion and contraction, typically as required in metal framed buildings, airports, shopping malls & tunnel joints. It also forms a specialised system to address the typical 3 axis movement that occurs in the event of seismic shock.

Gaps and joints created during construction tend to be uneven in width and the formation of a weather resistant fire and cold smoke seal can cause problems whilst at times ensuring adequate air flow through cavities in ambient conditions.

Tayfire Universal Fire Seal

The Tayfire Universal Fire (TUF) Seal has been designed to overcome these problems. The system consists of retaining brackets bonded with specialist intumescent material. An outer layer of glass cloth bonded with intumescent encompasses the seal.

It is available in 1 metre lengths, is easily and quickly installed. TUF seals are durable and require minimum maintenance. The fire properties of the seal are not affected by water and can therefore be fitted in areas subject to water ingress.

The seal is designed to cater for movement in all directions and can cope with a joint which has a movement range from 25mm up to 185mm.

Applications:

The versatility of the TUF seal allows it to be used in a wide variety of internal and external applications in both new build and refurbishment.

Seismic movement joint. Floor separation fire/movement joint.

Fire seal to wall cavities. Junction of compartment wall/floor or structural soffit.

Joint at wall heads. Joint between cladding and floor.

Authority:

The Tayfire Universal Fire seal has been tested at Warrington Fire Centre to BS 476: Part 20: 1987 and achieved 270 minutes integrity and up to 190 minutes insulation.

Further information on an extensive range of other fire protection products is available from the company.

These include intumescent coatings for timber and steel and also fire barriers.

For further information please visit www.tayfire.co.uk

 
Terms and Conditions   |   Privacy Policy   |   Copyright of STP  
Specialist Technical Products Ltd: Unit 9, Smoke Hall Lane, Winsford, Cheshire, CW7 3BE
Tel: 01606 590 909    Fax: 01606 596 797    e-mail: enquiries@stptapes.co.uk